Trailer hitch Coupler Lock 2 5/16" High Security fits Demco and others

Description

High security lock fits any 2 5/16" coupler as long as the overall height of the coupler is 2 5/8" or less, and the overall width is 4" or less, as measured thru the axis of the ball. Designed to be used with a standard 20/70 diskus lock.  Shackle made from solid 1/2" steel. Base plate is 1/2" thick with a stainless steel hinge pin. Textured powder coated finish, with a e-coat base finish below it.
Hole for lock shackle is .470" thru.
Ple
ase
verify
your
dimen
sions
bef
ore
ord
ering
.
If
you
have
any
questions
on
fitmen
t
feel
fr
ee
to
send
us
a
pic
ture
of
your
coupl
er
.
Flat bottom design so someone can't just tow your trailer off with a undersized ball or post.  Diskus lock prevents any bolt cutter thieves. Solid steel construction prevents anyone from beating it off with a hammer, unlike cast aluminum/ locks on market
AUCTION IS FOR THE COUPLER LOCK ONLY, AND DOES NOT INCLUDE THE DISKUS LOCK SHOWN IN PICTURES.
NOT THE CORRECT LOCK? SEE OUR OTHER VERSIONS IN THE LINKS BELOW
https://www.ebay.com/itm/333676999531
This fits a common 2 5/16" Curt coupler that the above lock won't fit
https://www.ebay.com/itm/333676976298
This fits most 2" couplers
https://www.ebay.com/itm/334301458607
This fits a not so common 2 5/16" coupler sold on some Moritz and PJ trailers
Designed, Manufactured, and constructed in Dayton, Ohio with 100% USA materials and labor.
VISIT OUR STORE TO SEE ALL OF OUR PRODUCTS  (It's the little blue door next to our feedback count, next to username)