Thermo Scientific Trace 1310 ISQ GC-MS | TriPlus Sampler | Computer *LOW HOURS*

Description

Trace 1310 ISQ GCMS
Item Details
GCMS system is in excellent cosmetic and functional condition.
Manufactured in 2016, this
system has only 6 hours on it! Please see the pictures and description below for more information.
***SYSTEM HAS 6 HOURS OF RUN TIME***
Thermo
Scientific™ TRACE™
1310 GC
Complete icon-driven touch screen
user interface for direct local instrument control
Instant Connect Injector Modules
Ability to swap or replace entire injector assembly in less than 2 minutes
Split/Splitless and multi-mode (including on-column)
Programmed Temperature Vaporizing (PTV) available
0.001–1000 kPa digitally controlled carrier gas with gas saver and septum purge
Oven operating temperature Range: Ambient +3 °C to 450 °C
Maximum heating rate: 125 °C/min
Oven cool-down (22 °C ambient): 450 °C to 50 °C in <4 min
Retention Time Repeatability: <0.0008 min
Peak Area Repeatability: <0.5 % RSD
Instant Connect Detector Modules - Ability to add, swap, or replace entire detector assembly in less than 2 minutes
Detectors Available: Flame Ionization Detector, Thermal Conductivity Detector, Electron Capture Detector, Nitrogen Phosphorus Detector
Fast Data Acquisition Rate: up to 300 Hz
ISQ Mass Spectrometer
Electron Impact Ionization (EI), with full scan (FS), SIM
Chemical ionization, including PCI, NCI, Thermo
Scientific PPINICI and EI/PCI/NCI Combination
•Timed acquisition (t-SIM) mode (standard on ISQ LT)
Thermo Scientific™ ExtractaBrite™ off-axis ion source, with repeller, source lenses, RF lens and dual filaments in all ionization modes, programmable to 350 °C
Dual-stage mass filter with off-axis ion guide pre-filter
for noise reduction and solid, homogeneous non-coated, maintenance-free quadrupole rods
Independently heated zones for: transfer line, ion
source, and ion optics/mass analyzer
Mass Stability
better than 0.1 u/48 hours/ΔT ≤2 K Detector
DynaMax XR detection system, with off-axis 10 kV
dynode, discrete dynode electron multiplier and electrometer, linear from 0 to 68 μA
Mass Range
1.2–1100 u with unit mass resolution
Acquisition Rate:
Ability to acquire more than 240 scans/s in SIM
Ability to acquire more than 97 scans/s in FS when
scanning over a range of 125 u (ISQ LT GC-MS)
Ability to acquire more than 73 scans/s in FS when
scanning over a range of 125 u (ISQ QD GC-MS)
Pumping System:
standard (60 L/s) or extended (300 L/S) capacity
turbomolecular pump (ISQ QD GC-MS)
Mechanical rotary vane 3.3 m3/h oil pump
CI Reagent Gas Capabilities
Software-switchable dual reagent gas with digital
flow control
Ammonia, methane, isobutane and CO2 presets
Electron Energy
Adjustable from 0 eV to 150 eV Emission Current
Up to 350 μA
Transfer Line Temperature Up to 400 °C
TriPlus RSH Autosampler
For Use With (Equipment)
For Liquid Injection with Standard X-Axis Length
Type
TriPlus RSH Autosampler for Liquid Injection with Standard X-Axis Length
Sample Capacity
4608 Well Plates, 840 × 0.5 mL or 0.7 mL Vials, 648 × 2 mL Sample Vials, 240 × 10 mL or 20 mL Vials
Injection Mode
8 Fully Customizable Method-Specific Injection Mode Presets
Injection Speed
Selectable from 0.1 μL/sec. to 2000 μL/sec.
Injection Volume
0.1 to 10,000 μL
Description
Basic TriPlus RSH for liquid injection with standard X-axis length. Complete with liquid syringe tool, 2 x 10 µL syringes, a standard washing station and a single tray holder with 3 trays for 2 mL vials.
Tool Exchange
Compatible with Automatic Tool Change (ATC) or manual Tool Release Station
Included with the Auction:
Trace 1310 GC w/ Split/Splitless Injector
ISQ QD Mass Spectrometer
TriPlus RSH Autosampler (with new in box syringe)
Edwards RV3 Vacuum Pump
Computer loaded with control software (configured for system)
All cables / wiring for entire system
Computer monitor, mouse, keyboard
Terms Of Sale
Only items in the description are included in the sale. If there is a question about what is or is not included please ask prior to purchasing
Buyer must have equipment commissioned by a qualified professional proficient with the system
If a computer is included in the sale, media licensing and terms of use are the responsibility of the buyer. No licenses are included or implied unless specifically stated in the description
Equipment is cleaned with 70% IPA wipe only. Chemicals and other contaminants may be present and proper handling and commissioning of equipment is the responsibility of the buyer.
All major forms of payment accepted including Paypal, credit card, wire / electronic bank transfer, bank checks, business checks (must clear prior to shipment)
See auction listing terms for warranty / return period
All returns must be received in the same condition they were sold
All returns must be packaged to avoid shipping damage. Return shipping damage is the responsibility of the buyer.
Shipping Information
The best shipping / freight company will be selected at the seller's discretion based off the parcel to be shipped and delivery location
If buyer would like to arrange their own shipping please let us know prior to checkout and a zero sum shipping invoice will be provided
All freight shipments require contact name, business name, phone number, email, physical street address
For international shipments, it is the buyer's responsibility to determine import restrictions and pay all duties/taxes
Flat rate shipping amounts are for 48 continental US states
Local pickups available with appointment from Tewksbury, MA