-40%

OHMEDA Medical Biliblanket Plus High Output Phototherapy System for parts

$ 42.23

Availability: 100 in stock
  • Condition: For parts
  • MPN: 6600-0652-801
  • All returns accepted: ReturnsNotAccepted
  • Brand: Ohmeda

    Description

    The item you are bidding on is:
    OHMEDA Medical Biliblanket Plus High Output Phototherapy System for parts
    Model: 6600-0652-801
    BiliBlanket
    Plus
    High Output
    Phototherapy System
    A light filter, positioned in front of the lamp, rejects light outside the 400 to 550 nanom-
    eter range. This filter blocks nearly all ultra-violet and infrared light; only the blue light is
    allowed to pass. This filtered light is focused on the inlet of the fiber optic cable.
    Light intensity may be selected by the front panel brightness rotary control. Control
    range is from 19± 4.75 μW/cm
    2
    /nm at full counter clockwise to 45± 11.25 μW/cm
    2
    /nm
    at full clockwise with a medium detent at 32± 8 μW/cm
    2
    /nm. See Light Output Measure-
    ment Procedures in Section 4 for precise light output measurement.
    Mode select
    Selects the operating mode ; phototherapy or transillumination. Using the Ohmeda
    transilluminator light pipe, the BiliBlanket Plus High Output System can be used as a
    transilluminator.
    Supply power
    Power for the light source unit can be supplied by any standard AC mains power
    source at either 50 or 60 Hz that have voltages in the range: 90 - 132 or 180 - 264.
    Power enters the light source through a receptacle that has an integral power switch.
    Cooling
    A fan cools the light source unit. A thermal cutout switch located next to the light-filter
    protects the light source unit and fiber optic cable or transilluminator from overheating.
    Fiber optic cable
    The fiber optic cable contains 2400 individual plastic fibers which transmit the light from
    the light source to the light pad. The light pad is constructed by weaving these fibers
    into a mat. This patented process produces a pad with light over the entire surface.
    These fibers are randomized in the cable to eliminate any local intensity gradients due
    to bulb hot spots, dust on the filter, dust on the cable end, etc. This allows the nearly
    uniform, continuous blanket of light. A disposable protective pad cover is provided to
    reduce the risk of cross-contamination and make the patient more comfortable.
    The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
    DISCLAIMER: Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by bidding on this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer.
    This item has been properly cleaned prior to shipment.